How to install the conveyor belt correctly?

conveyor belts install

Many people will ask how the conveyor belt should be installed is the best, sometimes the installation is good, the conveyor belt will run off and other problems, so how to correctly install the conveyor belt, here, we summarize the following points, hoping to be helpful to the customers.

1.Put on a flexible shaft on the conveyor belt coiling core, and frame the belt coil well. Pay attention to the direction of the upper and lower cover glue before putting it on the shelf.

2.In workplaces not suitable for shelves, the conveyor belt can be rolled away, and the conveyor belt at the folding place has a large enough radius of curvature to prevent damage to the conveyor belt. Heavy objects are prohibited to be placed on the conveyor belt at the folding place.

3.If the conveyor belt is replaced, the new belt and the old belt can be connected together, and the unloading and installation of the new conveyor belt can be carried out at the same time.

4.For horizontal operation of the conveyor, the old conveyor can be cut off at any point, the inclined direction of the conveyor, you need to choose the cutting point, to prevent the weight caused by sliding out of control.

5.After putting the position of the new belt in the conveyor, one end of the belt is fixed with the fixture, and then connected with the rope that bypasses the roller and the pulley. The conveyor belt is balanced on the conveyor through the traction device. When traction, the conveyor belt and the frame should be prevented from squeezing each other.

6. One end of the conveyor belt is fixed on the conveyor frame with a fixture, and the other end is tensioned through a pulley until the conveyor belt has no obvious sagging on the return roller.

7. It is recommended to fix the tension device 100-150mm away from the starting point.

The above 7 points are summarized for the conveyor belt installation precautions, must pay attention to these points in the installation of the conveyor belt, so that the conveyor belt can be successfully installed, so as not to affect the operation efficiency of the conveyor belt.